Okay, 

long long time I did not post anything here. Anyway back on Lead Adventure Forum there was a discussion about the new 3d Printed ancient range from Blitzkrieg Miniatures. Last year in December I got some troops from their Successors range. 8 Thureophoroi and 4 Seleucid phalangites. The latter were for a gift and now they are in the Republic of Korea, the former were for my own troops. 

They have all been painted so it is time to show them.

Here you can see six of them.

I really like them, they are clean and crisp resin prints sculpted in 3d. They come with almost all supports already removed, and with hands, if appropriate, already drilled to insert metal pikes or spears. Blitzkrieg also includes appropriate steel 'pins' for the purpose. I replaced the one in the Thureophoroi with North Star 50mm spears with leaf spearpoints, because the steel ones did not have spearpoints, and I do not like to work with steel...

Now the big question on Lead Adventure Forum was one of compatibility with existing ranges, mainly Victrix and Aventine so I took some pictures.

Six Blitzkrieg Thureophoroi and six Victrix Peltasts side by side. They aren't all that different in height but the Blitzkrieg are chunkier. Also their helmet's plumes are taller.

The following images are from my Saga Age of Hannibal Epirote Army. Beside the Blitzkrieg and Victrix  miniatures you can see Foundry and Aventine. The Elephant is from  Gripping Beast.

Talking about 3d Printing...

Recently I have read some less than inspiring comments on a Forum on 3D printed vehicles, some were general, some were directed against Butlers Printed Models. It happens that I own several 15mm models from them, and I do think that the comments were basically sockpuppetting from people linked to other companies. 

Of course I cannot present evidence (but one of the most virulent commentators was indeed a scratch builder whose excellent masters are used by another company...), but there is often a clear message:

3d printing is bad buy our resins...

Now my experience with 3d Printing is mixed. I have tried Shapeways, and while the ship in 1/6000, 1/4800, and 1/3000 I got were from good to excellent, the only tank in 15mm I bought there, a Chinese Type 96G, was subpar and extremely expensive. While I can recommend ships and some shops i particular (more on an upcoming post), once you got to tanks in larger scales, quality and price are not there. 

On the other hand my discovery of Butlers Printed Models has been an happy experience. Their vehicles are reasonably priced and compare well with 15mm offers, either in plastic, metal, or resin. 

Here is one of my first model, a Centurion Sho't. first of all, except quality castings in US no one does a 15mm Sho't for the 1973 war. Peter Pig does one for lebanon with ERA armor, BF has only the Meteor engine one.

Now if you look closely you can see the 'trademark' of 3D printing, the lines or stripes, but photography emphasized them more than real life sight. The other issue is the riveting in this particular tank the rivets came a bit 'larger than life.'  The other issue is excess material. The underside of the tank is ugly (but you do not see it!), and the underside of the gun barrell required a strong clean up. Said that, for a 15mm vehicle it is more than reasonable. I would not say awesome, but definitely good.

I replaced the MG with a plastic one, MGs are, as the time of writing, one of the weak points of the range.

Our second 'witness' is a soviet BTR-60PB in East German livery.

Another good representation of the real life vehicle. The turret MG is not bad at all, better than the metal one in the PSC/ArmiesArmy Resin-metal ones. The 'striping' is not prominent at all, despite the dry-brush. The real bad issue of this specifi model is the light above the driving hatch that is not well reproduced. The one on the plastic FoW kits is much better. But the Butlers one is around half the price, and the overall quality is good. 

Finally, the last witness, for now, is an Israeli Defence force Magach (M48 with 105mm gun and local modification). Again this is a vehicle you do not find anywhere else. It is also quite peculiar compared to the previous one because its rounder shape. Rounder shapes is were 3D printing is often  weaker.

The turret pass inspection with flying colours. The wheels... a bit less. it is probably the weaker visible area. In the last picture you can see the little problem with excess material (even after cleaning) on the underside of the gun barrel.  Again MGs were replaced with plastic ones from the spare box. Said that it is not a vehicle I would complain about. IT captures the shapes well, the jerry can on the turrets are nice, and on the table it works well. 

Verdict?

I am more and more persuaded that there is a lot of sock-puppetting involved in the bash. It is not perfect, it has limitations, but 3D printing is a viable wargaming tools, and, thanks to company like Butlers, it is helping us gamers. 

PS: no vehicle story today... it was more a post on 3D printing than the 'toys', but feel comforted, I will talk about them very soon!

PLAN Destroyers

Well, another little post...

this time for two 052B PLAN destroyers. They are 1/3000 white strong flexible from Shapeways ("Objects may appear" shop). They are relatively cheap and quite nice. I am getting used and happy with the WSF mediums for miniatures, at least for ships in 1/3000 scale. Once painted the granular aspect is not as bad as people want it to be. The details is also quite good. 

 A view of both ships (Wuhan and Guangzhou). The 051B are area air defence destroyers designed to protect other ships from air threats. They are thus equipped with SA-N-12 missiles as primary system. Thye also carry ASW weapons (including an helicopter) and SSM. They are quite nice ships. I hope to have been able to reproduce the very light gray (almost white) color used by the PLAN.

 Close up of the Guangzhou

From the top, you can see the SSM launchers amidships and the SAM in front of the superstructure.

6mm Centauro B1 from shapeways.

Well...

I cannot sculpt... but I can beg... so I asked a Shapeways modeler if he could have done some 6mm modern Italian vehicles, specifically Centauro Armoured Cars and Ariete tanks. The first results are here.

I like them. They are in FUD and a bit pricey, but they are detailed models. They are an huge improvement over the old H&R model (I was hoping the new management would have redone it). If you are interested you can order them here:

Shapeways shop

Now I do not get anything from them. But I think the modeler, Freakazoitt deserves a bit of advertisement (he has some good and nice WW1 tanks too, in different scales).  More interests could also lead to more models and in different scales (15mm anyone?)

I will post more when the Ariete are ready and I will get the models.